Foxing, Spotting and Mold on Books
By IdentifyThese Editorial · Reviewed · 3 min read
Paper is cellulose with sizing and adhesives on it, which makes a book a well-stocked food source in a humid room.
Active mold or old damage
Smell. Active growth smells musty. Old foxing does not.
Texture. Active mold is fuzzy, powdery or slightly raised. Foxing is flat and in the paper.
Colour. Active growth is white, grey, green or black. Foxing is reddish-brown.
Change. Photograph it and compare in a month. Anything spreading is active.
| Appearance | Likely | Action |
|---|---|---|
| Fuzzy white or grey bloom | Active mold | Dry, isolate, brush outdoors |
| Small reddish-brown spots | Foxing, usually inactive | Stabilise the environment |
| Black speckling, musty | Active or recent | Dry and clean; check storage |
| Wavy, cockled pages, no smell | Past water damage | Nothing urgent |
| Orange or pink staining | Bacterial or fungal staining | Usually permanent |
The first step is drying
Nothing else can be done to a damp book. Growth continues while moisture remains, and cleaning wet paper destroys it.
Stand the book on end, fan the pages, and put it in a dry room with air movement. A fan pointed across it rather than at it. Absorbent paper interleaved every twenty pages or so, changed as it takes up moisture, speeds it considerably.
Days rather than hours, and the book will not return to its original shape.
Freezing
The standard first response in libraries and archives, and available to anyone with a freezer.
Sealing a damp or mouldy book in a bag and freezing it halts fungal growth and stops further damage. It does not kill the mold, and it buys unlimited time to deal with the item properly, which is what matters when several things are wet at once.
Frozen material can be dried later, or taken to a conservator.
Cleaning
Only when completely dry.
Outdoors, with a soft brush, brushing away from the spine so material does not lodge in it. A vacuum with a HEPA filter and a brush attachment, held slightly off the surface with the suction reduced, works well for surface bloom.
No liquid. No bleach, no vinegar, no alcohol on paper — all of them stain, weaken fibres, or set the discolouration permanently.
Isolate first
A mouldy book on a shelf shares its spores with its neighbours, and a shelf with one affected volume frequently has several by the time it is noticed.
Bag anything affected before carrying it through the house, and check the books either side of it.
The storage problem
Mold on books is a symptom of the room. Cool external walls, basements, attics and boxes on a concrete floor are the usual settings, and the cause is the same humidity problem described in basement mold.
Shelves against an external wall need a gap behind them for air movement. Books in boxes need to be off the floor and away from walls. Relative humidity below 60 per cent, and ideally between 45 and 55, keeps paper stable.
Newspaper, photographs and documents
Photographs are more vulnerable than books — emulsion supports growth well and sticks to itself and to glass when damp.
For anything of real value, the honest advice is to freeze it and contact a paper conservator rather than to attempt it at home. The techniques that work on a paperback do not scale down to something irreplaceable.
Deciding what to keep
A common paperback that smells musty after drying is usually not worth the effort of saving, and replacing it is cheaper than the hours involved.
That judgement is worth making explicitly, because the effort is otherwise spread thinly across everything and the items that actually matter get the same attention as the ones that do not.
Types referenced
The species matters less than you think
- Public health guidance is to remove all indoor mold regardless of type. The CDC and EPA do not recommend routine species testing for ordinary households, because the response does not change: find the water, stop it, remove the growth.
- “Toxic black mold” is a marketing phrase, not a category. Stachybotrys is real and does need soaked material to grow, so finding it tells you something useful about your building. But the health effects that are well established — allergy, asthma aggravation, irritation — are not specific to it.
- Mold without water does not persist. Cleaning growth while leaving the moisture source is why it comes back. The leak, the condensation or the ventilation is the actual problem.
Call a professional for areas larger than about 10 square feet, for anything in HVAC ductwork, after sewage or flood water, or if anyone in the household is immunocompromised or has a lung condition.
Keep reading
- Mold on Wood FurnitureSurface mold on a finished piece wipes off. Mold on bare wood has gone into the grain, and the difference decides whether the piece is recoverable.
- The Basement Smells and Nothing Is LeakingMost basement mold is condensation rather than a leak, and the counterintuitive part is that opening the windows in summer makes it worse.
- Is There Mold in the Ductwork?Ducts are rarely the source. The coil and the drain pan usually are, and cleaning the wrong part is the industry's most common sale.