Reading How a Mineral Breaks

By IdentifyThese Editorial · Reviewed · 3 min read

A mineral breaks the way its atoms are arranged, which means the break is diagnostic in a way colour never is.

The distinction

Cleavage is breakage along planes of weak bonding. The resulting surfaces are flat, reflective, and repeat at angles that are the same in every specimen of that mineral.

Fracture is breakage across the structure. The surface is curved, splintery or irregular, and its shape is not fixed.

Most minerals show one or the other predominantly, and some show both — cleavage in some directions, fracture in others.

Seeing it

Hold the specimen under a single light and rotate it slowly. Cleavage announces itself as a flash: a whole surface lighting at once, then going dark as it turns past the angle.

The strongest confirmation is several parallel flashes together. A single smooth face could be an accident of breakage or a crystal face; a stack of parallel ones is cleavage.

What the common patterns look like

Pattern Planes Example What you see
Basal, one direction 1 Muscovite Peels into sheets
Prismatic, two at 90° 2 Orthoclase Rectangular steps
Rhombohedral 3, not at 90° Calcite Breaks into leaning boxes
Cubic 3 at 90° Galena, halite Breaks into cubes
Octahedral 4 Fluorite Breaks into triangular faces
Conchoidal fracture None Quartz, obsidian Curved, shell-like

Calcite is the useful demonstration: a broken piece falls into rhombs, and every fragment is the same leaning-box shape as the whole. That is the clearest illustration of what cleavage means, and it is one of the reasons calcite is easy to identify once seen.

Cleavage is not a crystal face

The commonest confusion. A crystal face grew that way; a cleavage surface was made by breaking. They can look identical.

The distinguishing feature is that cleavage repeats through the specimen — break a piece off and the new surface is parallel to the old one. A crystal face is a surface of the whole crystal, and breaking it produces something different.

Why it matters for identification

Because it is nearly impossible to fake and independent of colour, which is the least reliable property a mineral has.

Quartz and calcite look alike to a beginner and break entirely differently: quartz has no cleavage and fractures conchoidally, calcite cleaves into rhombs. That single observation separates them faster than any other test, as calcite and quartz sets out.

The practical caution

Breaking a specimen to see how it breaks is destructive, and it should not be the first thing tried on anything that might matter.

Look at existing broken surfaces first — most field specimens have several — and use a small chip from an inconspicuous edge only when nothing else will do. Anything that might be valuable or unusual deserves the non-destructive tests first, in the order set out in preparing a rock for identification.

Quality of cleavage

Not all cleavage is equally obvious, and mineralogists grade it: perfect, good, distinct, poor. Mica splits into sheets with almost no effort, which is perfect cleavage; feldspar breaks along its planes most of the time but not always, which is good.

The practical consequence is that absent cleavage in a specimen does not prove the mineral lacks it. A poorly cleaving mineral broken awkwardly may show nothing, and a second specimen may show it plainly.

Parting, which looks like cleavage and is not

Some minerals break along planes created by twinning or by strain rather than by their bonding. It looks the same and is not a property of the mineral in the way cleavage is, since a specimen without the twinning will not show it.

It is a specialist distinction rather than a field one, and it matters mainly because it explains why a specimen occasionally breaks along a plane the textbook says should not exist.

Mineral pages referenced

Keep reading