What a Crystal's Shape Tells You

By IdentifyThese Editorial · Reviewed · 3 min read

Shape is one of the first things anyone notices and one of the last things they learn to read properly.

Habit is structure made visible

A mineral's atoms stack in a fixed arrangement, and when a crystal grows freely the external faces reflect that arrangement. Quartz builds six-sided prisms because its internal symmetry is six-fold, and it does so whether it grew in Arkansas or Madagascar.

That is what makes habit diagnostic. It is not a coincidence of growth conditions; it is the structure showing through.

The common habits

Habit Shape Typical minerals
Prismatic Elongated with a pointed end Quartz, tourmaline, beryl
Cubic Cubes, often with striated faces Pyrite, galena, halite
Octahedral Two pyramids base to base Fluorite, magnetite
Dodecahedral Twelve-faced, near spherical Garnet
Bladed Flat elongated plates Kyanite, barite
Botryoidal Rounded, like a bunch of grapes Hematite, malachite, chalcedony
Massive No visible form at all Anything, when crowded

The condition that has to hold

A crystal only shows habit if it had room. In a granite the grains grew simultaneously and interfered with each other, so almost nothing has a face — the same quartz that makes handsome prisms in a cavity is a shapeless grey grain in a rock.

Which is why habit is most useful on specimens from vugs, veins and geodes, and largely useless on a solid rock picked up from a hillside.

The pyrite case

Pyrite grows in cubes with fine parallel striations on the faces, and the striations run at right angles between adjacent faces. That is a specific enough signature to be conclusive.

It is also the reason pyrite gets identified confidently where gold does not: gold does not grow that way, and a cube is essentially proof of pyrite. The full comparison is in gold and pyrite.

Habit versus cleavage

They are different observations that both produce flat surfaces, and confusing them is common.

A crystal face grew that way and is part of the crystal's original outside. A cleavage surface was made by breaking, and it repeats: break a fragment off and the new face is parallel to the last. If a flat surface is dull or slightly rough it is more likely a growth face; if it is bright and mirror-flat it is more likely cleavage.

What habit does not tell you

Colour and habit together still leave a lot of overlap, and habit alone identifies almost nothing on its own. It narrows the field, and the confirming tests are hardness, streak and how the specimen breaks.

Quartz and calcite both form pointed crystals, and the shapes are genuinely different once seen — but the fast separation is that calcite fizzes in acid and is scratched by a knife, as calcite and quartz covers.

Twinning

Some minerals grow as two crystals intergrown in a fixed relationship, producing shapes that look impossible — crosses, wedges, hearts. Staurolite's cross and the interpenetrating cubes of fluorite are the familiar ones.

Twins are worth recognising because they can look like a different mineral entirely, and because well-formed ones are collectable in their own right.

Pseudomorphs

Occasionally a mineral dissolves away and something else fills the space, keeping the original shape. The result is a specimen with one mineral's habit and another mineral's composition — cubes that test as limonite rather than pyrite, for instance.

They are the exception that proves how reliable habit usually is, and they are worth knowing about because a specimen whose shape and chemistry disagree is not necessarily a mistake in the testing.

Using shape sensibly

Start with it, do not finish with it. A shape narrows the possibilities quickly and cheaply, and the confirmation comes from the tests in preparing a rock for identification, run in order on the candidates the shape suggested.

Mineral pages referenced

Keep reading